More than 45 years experience

Manufacturing of fluid filtration equipment and consumables

Manufactures a complete range of fluid filter equipment including consumables

Ruud Wolthuis started manufacturing filter equipment

Start Dutch Filtration

Opening Sales Office & Stock North America

Filter units manufactured

Filter Vessels manufactured

Dutch Filtration Company

We design and manufacture filtration equipment and filter consumables for the upstream oil and gas market and process industry. We built our knowledge of oilfield filtration solutions over many years of experience. We have an state of the art machine facility to manufacture our products and equipment. Our experienced welders are certified to weld DNV offshore skids and our filter housings in stainless steel, carbon steel and other exotic materials. We design, innovate, engineer and manufacture in-house, which results in a flexible organization which listens to its customers.

PRODUCTS

FILTER EQUIPMENT

Dutch Filtration manufactures an innovative range of filter equipment especially designed and build for oilfield upstream filtration industry and general industry. We engineer and manufacture Dual Vessel Filter Units, Filter Press, Slurry skid, Vertical Pressure Leaf filter, Pump set, Automatic Self cleaning filters, cartridges and bag filter vessels/housings , media filters, shearing devices, hoses baskets. All DNV2.7-1 certified by DNV or Loyds.
Read More

FILTRATION CONSUMABLES

Our full range of filter consumables are designed and manufactured against the high demanding quality standards of the oil and gas industry. We offer a full range filter elements for fluid filtration such as: absolute pleated cartridges OD 2.5 and high flow filter cartridge 6inch, nominal rated string wound and spun bonded filters, filter bags, oil absorption filters, coalescer elements, DE filter aid.
Read More

RENTAL FILTER EQUIPMENT

Dutch Filtration offers a range of rental filter equipment; for long term and short term rental. We do have most common filter consumables on stock to complete your filtration package. Please call or email us for availability and advice.
Read More
Read More
Read More
Read More

Rudi Quick Opening Closure standard on all our cartridge and bag filter housings

Dutch Filtration has developed a unique and robust quick opening-closure for all our cartridge and bag filter units specially for the oil and gas industry. This pressure vessel closure system is especially designed for safe, ergonomic, quick and leak free change out of filter cartridges. The  Rudi QOC has many benefits over the traditional swingbolt closures for cartridge filter vessels, such as: no loose nuts, no tools required, safe two hand operation and within few seconds. Rudi QOC: Safe, Reliable, Quick, Easy and 100% sealing.

Drop test DNV 2.7-1

Watch the video of the drop test of our dual filter vessel frame. This drop test is mandatory for DNV 2.7-1 certified skids. All new designed offshore units which are lifted offshore need to certified to DNV2.7-1

APPLICATIONS

Dutch Filtration offers a broad range of filter products for divers applications. Most of our filters are used in the Oilfield Industry but we offer also a range of filters for the Process Industry.

  • Completion Fluids
  • Produced Water
  • Work Over Fluids
  • Gravel Pack Fluids
  • Wellbore Clean up Fluids
  • (Bio) Diesel
  • Surface Water intake
  • Process Water
  • Pre filtration RO
  • Frac fluids
  • Pipeline Flushing
  • Waste Water
  • Geothermal energy
  • Acids
  • Solvents
  • Gels, Amines and Glycols
  • Food and Beverage

FILTRATION OF COMPLETION FLUIDS / WELL BORE CLEAN UP

The purpose of filtration completion, worker or well bore clean up fluid is to prevent the downhole contamination of the formation. Contamination reduces production and shortens the life a producing well. Contamination of the formation with particles can occur during wellbore clean up, perforating, fracturing, acidizing, workover, water injection, and gravel packing as well. Any time fluid is put into the well bore with a solid content, no matter how slight; there is a chance of damaging the formation. Therefore all fluids used during completion of an oil or gas producing must be free of dirt particles. Dutch Filtration will support you to select the best suitable equipment and consumables to perform filtrations service; efficient, safe and against optimum cost per treated barrel.
Read More

WATER INJECTION / WATER FLOODING

In the oil industry, waterflooding or water injection is where water is injected into the oil or gas formation, to increase pressure in the formation and thereby stimulate production. Water injection or water flooding is done on- and offshore, to increase oil recovery from an existing oil or gas reservoir. The filtered water is injected to support the reservoir pressure  (also known as voidage replacement), and also to sweep or displace oil from the reservoir, and drive it towards a production well. Normally only 30% of the oil in a reservoir can be extracted (primary recovery), but water injection increases that percentage up to 50% (known as the recovery factor) and maintains the production rate of a reservoir over a longer period. Any source of  water can be used for injection. Filtration of the water prior to injection is crucial.
Read More

PRODUCED WATER TREATMENT

There is a high demand for Produced water free of hydrocarbons for discharge. In Oil and gas production operations on offshore platforms produced water is the largest volume waste stream. Therefore it’s also used for re-injection for enhanced oil recovery. It’ s necessary the produced water is free of particles and bacterias. >>>LONGER LIFE EQUIPMENT.. Dutch Filtration offers guaranteed removal of certain size particles and removal of free hydrocarbons in an economic way. With custom designed produced water treatment package, best fit for discharge or re-injection. Also high reliability, High quality against balanced OPEX and CAPEX. Products

  • Cartridge Filter Units
  • Coalescer Units
  • Media Filter / Nut Shell
  • Strainers
  • Automatic Self Cleaning Filters
Read More
Read More
Read More

CORE FEATURES

Engineering

Our engineers design with Inventor 3D modeling software.  Inventor 3D is also used for stress analysis as well as programming our CNC machines. We offer the maximum commitment and flexibility to customer agreement and design products of the highest quality.

In House Production

We have a state of the art machine facility to manufacture our products and equipment. Our experienced welders are certified to weld DNV offshore skids and our filter housings in stainless steel, carbon steel and other exotic materials.

Many years experience

We built our knowledge of oilfield filtration solutions on many years of experience. We design, innovate, engineer and manufacture in-house, which results in a flexible organization which listens to its customers.

Fast responding

We know efficiency and reliability and maximum performance are very important in the oilfield industry and many other industries. We offer you 24/7 continuously support and fast response .

Delivers in almost every country

We deliver to almost all countries worldwide. Our location is central located in The Netherlands, 1 hour from Port of Rotterdam and 1/2 hour from Amsterdam Schiphol Airport.

Product support

Our team is committed to assist you during the startup and operation process of our equipment. We can give on-site training, we can help you with troubleshooting techniques. We offer you product support post production and installation on- and offshore.

LATEST NEWS

Ruud Wolthuis started manufacturing filter equipment

Start Dutch Filtration

Opening Sales Office & Stock North America

Filter units manufactured

Filter Vessels manufactured

CORE FEATURES

Engineering

Our engineers design with Inventor 3D modeling software.  Inventor 3D is also used for stress analysis as well as programming our CNC machines. We offer the maximum commitment and flexibility to customer agreement and design products of the highest quality.

In House Production

We have an outstanding machinepark to produce our products. Our experienced welders are certified to weld DNV offshore skids and our filter housings in stainless steel, carbon steel and other exotic materials.

Many years experience

We did build our knowledge of oilfield filtration solutions on many years of experience. We design, innovate, engineer and manufacture in-house, which results in a flexible organization who listen to their customers.

Fast responding

We know efficiency and reliability and maximum performance are very important in the oilfield industry and many other industries. We offer you 24/7 continuously support and fast response .

Delivers in almost every country

We deliver to almost all countries worldwide. Our location is central located in The Netherlands, 1 hour from Port of Rotterdam and 1/2 hour from Amsterdam Schiphol Airport.

Product support

Our team is committed to assist you during the startup and operation process of our equipment. We can give on-site training, we can help you with troubleshooting techniques. We offer you product support post production and installation on- and offshore.

Look No Further. Get Started Today

Contact us
set-equipment-Dutch-Filtration

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and product updates.

You have Successfully Subscribed!